Product Overview
Stainless steel end caps designed for hydrostatic internal pressure testing of polymer tubes from 16 mm to 2600 mm diameter (custom up to 4000 mm). Features a patented adjustable gasket system (Patent TR 2016/20266) with no special tools required. Available in cap sizes from Ø16 mm to Ø800 mm — compare the models below.
Key Features
- Cap sizes: Ø16 mm – Ø800 mm (24 configurations)
- Diameter range: 16–2600 mm (custom up to 4000 mm)
- Maximum working pressure: up to 100 bar
- Substance: AISI 304, 316, 316L stainless steel
- Patented adjustable gasket system (TR 2016/20266)
- Single/multi-lip silicone & rubber gasket options
- Compatible with PE, PP, PVC, PE-RT, PEX pipes
- 1-year warranty
Standards
- ISO 1167 — Thermoplastic tubes — resistance to internal pressure
- ASTM D1598 — Time-to-failure of plastic pipe under constant internal pressure
- ASTM D1599 — Short-time hydraulic failure pressure of plastic pipe
Specifications
- MaterialAISI 304
316
316L - Optional CoatingHot-Dip Galvanized
- Gasket SetupPatented adjustable (TR 2016/20266)
- Diameter Range16 mm up to 2,600 mm (custom to 4,000 mm)
- Warranty2 years
Model Range
Model
Cap Diameter
Max. Examine Pressure
Manufacturing
AL CAP 16 | 16 mm | 100 Bar | Machining
AL CAP 20 | 20 mm | 100 Bar | Machining
AL CAP 25 | 25 mm | 100 Bar | Machining
AL CAP 40 | 40 mm | 100 Bar | Machining
AL CAP 63 | 63 mm | 100 Bar | Casting–Machining
AL CAP 75 | 75 mm | 100 Bar | Casting–Machining
AL CAP 90 | 90 mm | 100 Bar | Casting–Machining
AL CAP 110 | 110 mm | 100 Bar | Casting–Machining
AL CAP 125 | 125 mm | 100 Bar | Casting–Machining
AL CAP 140 | 140 mm | 100 Bar | Casting–Machining
AL CAP 160 | 160 mm | 100 Bar | Casting–Machining
AL CAP 180 | 180 mm | 100 Bar | Casting–Machining
AL CAP 200 | 200 mm | 100 Bar | Casting–Machining
AL CAP 225 | 225 mm | 100 Bar | Casting–Machining
AL CAP 280 | 280 mm | 100 Bar | Casting–Machining
AL CAP 315 | 315 mm | 100 Bar | Casting–Machining
AL CAP 355 | 355 mm | 60 Bar | Casting–Machining
AL CAP 400 | 400 mm | 60 Bar | Casting–Machining
AL CAP 450 | 450 mm | 60 Bar | Casting–Machining
AL CAP 500 | 500 mm | 60 Bar | Casting–Machining
AL CAP 560 | 560 mm | 60 Bar | Casting–Machining
AL CAP 630 | 630 mm | 60 Bar | Casting–Machining
AL CAP 710 | 700 mm | 40 Bar | Casting–Machining
AL CAP 800 | 800 mm | 40 Bar | Casting–Machining
Specifications
| Parameter | Specification |
|---|---|
| Brand | RTPLINE |
| Code | 9024800000 |
Specifications are configurable to your pipe sizes and test standard. Ask us for the full datasheet and a configuration proposal.
Source: RTPLINE product engineering data · Updated November 2026
How a hydrostatic pressure test works
Seal and fill the specimen
Mount the pipe sample in the end caps, fill it with water and remove trapped air so the internal pressure acts evenly along the test length.
Heat, pressurize and hold
Bring the water bath to the specified test temperature, then apply and hold constant internal pressure for the required duration while the control system logs the curve.
Detect failure and record
The system monitors pressure, temperature and time. A drop or burst is recorded as failure; a completed hold is recorded as a pass, and the result can be exported for the test report.
Actual pressure, temperature and hold time are set by the test standard and the pipe specification, not by the machine alone.
What the standards mean
International method for determining the resistance of thermoplastics pipes, fittings and assemblies to constant internal water pressure at a controlled temperature.
Standard test method for time-to-failure of plastic pipe under constant internal pressure — the long-term hydrostatic strength test.
Standard test method for resistance to short-time hydraulic pressure of plastic pipe, tubing and fittings — the burst-pressure test.
Testing to a published standard keeps results comparable with other laboratories and with your customer's incoming inspection.



