Product Overview
Endkappen aus Edelstahl für die hydrostatische Innendruckprüfung von Polymerrohren mit einem Durchmesser von 16 mm bis 2600 mm (auf Anfrage bis zu 4000 mm). Verfügt über ein patentiertes, verstellbares Dichtungssystem (Patent TR 2016/20266), für das kein Spezialwerkzeug erforderlich ist. Erhältlich in Kappengrößen von Ø 16 mm bis Ø 800 mm – vergleichen Sie die Modelle unten.
Wichtigste Merkmale
- Kappengrößen: Ø 16 mm – Ø 800 mm (24 Ausführungen)
- Durchmesserbereich: 16–2600 mm (auf Anfrage bis zu 4000 mm)
- Maximaler Betriebsdruck: bis zu 100 bar
- Werkstoff: AISI 304, 316, Edelstahl 316L
- Patentiertes, verstellbares Dichtungssystem (TR 2016/20266)
- Ein- bzw. mehrlippiges Silikon & Optionen für Gummidichtungen
- Kompatibel mit PE, PP, PVC, PE-RT, PEX-Rohre
- 1 Jahr Garantie
Normen
- ISO 1167 – Thermoplastische Rohre – Beständigkeit gegen Innendruck
- ASTM D1598 – Zeit bis zum Versagen von Kunststoffrohren unter konstantem Innendruck
- ASTM D1599 – Kurzzeitiger hydraulischer Versagensdruck von Kunststoffrohren
Technische Daten
- MaterialAISI 304
316
316L - Optionale Beschichtungfeuerverzinkt
- Einbau der DichtungPatentierte Verstellmöglichkeit (TR 2016/20266)
- Durchmesserbereich16 mm bis 2.600 mm (auf Anfrage bis 4.000 mm)
- Garantie2 Jahre
Modellpalette
Modell
Durchmesser der Kappe
Max. Druck prüfen
Fertigung
AL CAP 16 | 16 mm | 100 bar | Zerspanung
AL CAP 20 | 20 mm | 100 bar | Bearbeitung
AL CAP 25 | 25 mm | 100 bar | Zerspanung
AL CAP 40 | 40 mm | 100 bar | Bearbeitung
AL CAP 63 | 63 mm | 100 bar | Guss – Bearbeitung
AL CAP 75 | 75 mm | 100 bar | Guss – Bearbeitung
AL CAP 90 | 90 mm | 100 bar | Guss – Bearbeitung
AL CAP 110 | 110 mm | 100 bar | Guss – Bearbeitung
AL CAP 125 | 125 mm | 100 bar | Guss – Bearbeitung
AL CAP 140 | 140 mm | 100 bar | Guss – Bearbeitung
AL CAP 160 | 160 mm | 100 bar | Guss – Bearbeitung
AL CAP 180 | 180 mm | 100 bar | Guss – Bearbeitung
AL CAP 200 | 200 mm | 100 bar | Guss – Bearbeitung
AL CAP 225 | 225 mm | 100 bar | Guss – Bearbeitung
AL CAP 280 | 280 mm | 100 bar | Guss – Bearbeitung
AL CAP 315 | 315 mm | 100 bar | Guss – Bearbeitung
AL CAP 355 | 355 mm | 60 bar | Guss – Bearbeitung
AL CAP 400 | 400 mm | 60 bar | Guss – Bearbeitung
AL CAP 450 | 450 mm | 60 bar | Guss – Bearbeitung
AL CAP 500 | 500 mm | 60 bar | Guss – Zerspanung
AL CAP 560 | 560 mm | 60 bar | Guss – Bearbeitung
AL CAP 630 | 630 mm | 60 bar | Guss – Bearbeitung
AL CAP 710 | 700 mm | 40 bar | Guss – Bearbeitung
AL CAP 800 | 800 mm | 40 bar | Guss – Bearbeitung
Häufig gestellte Fragen
- QFür welche Rohrdurchmesser sind die Endkappen geeignet?
- ASpezifikationskappen von Ø 16 bis Ø 800 mm in 24 Größen; Die Anlage ist für Rohre mit einem Durchmesser von 16 mm bis 2.600 mm ausgelegt, und maßgeschneiderte F&E-Kappen reichen bis zu 4.000 mm.
- QWelchem maximalen Druck halten sie stand?
- ABis zu 100 bar bei Durchmessern von Ø16 bis Ø315 mm, 60 bar bei Durchmessern von Ø355 bis Ø630 mm und 40 bar bei den größten Größen – siehe die Typentabelle auf dieser Seite.
- QWas ist das Besondere an diesem Dichtungsaufbau?
- AEs handelt sich um eine patentierte, verstellbare Konstruktion (TR 2016/20266) mit Optionen für Ein- oder Mehrlippendichtungen aus Silikon und Gummi, ohne Spezialwerkzeug montiert.
- QWelche Rohrwerkstoffe können geprüft werden?
- ASport, PP, PVC, PE-RT- und PEX-Rohre für Innendruckprüfungen gemäß ISO 1167, ASTM D1598 und ASTM D1599.
Specifications
| Parameter | Specification |
|---|---|
| Brand | RTPLINE |
| Code | 9024800000 |
Specifications are configurable to your pipe sizes and test standard. Ask us for the full datasheet and a configuration proposal.
Source: RTPLINE product engineering data · Updated November 2026
What the standards mean
International method for determining the resistance of thermoplastics pipes, fittings and assemblies to constant internal water pressure at a controlled temperature.
Standard test method for time-to-failure of plastic pipe under constant internal pressure — the long-term hydrostatic strength test.
Standard test method for resistance to short-time hydraulic pressure of plastic pipe, tubing and fittings — the burst-pressure test.
Testing to a published standard keeps results comparable with other laboratories and with your customer's incoming inspection.



