Product Overview
PLC-controlled laboratory system for the boil examine of particleboard and wood-based panels in accordance with TS EN 1087-1. Specimens are exposed to boiling water under controlled conditions in an 800 × 600 × 200 mm tank, with automated water level control, an automated lifting rack, data logging and USB export. The tensile strength perpendicular to the plane of the board (internal bond) after boiling is evaluated on a separate mechanical examine unit.
Core Features
- Inner tank 800 × 600 × 200 mm, boiling point (100 °C) reached within about 90 + 10 minutes
- Programmable boiling time of 1–100 hours from the HMI
- Sensor-based automated water level regulation with automatic replenishment from an auxiliary tank
- Automatic lifting grate raises specimens above the water level at the end of the examine
- 4 removable stainless specimen baskets, 200 × 150 × 50 mm
- No continuous water circulation, so specimens are protected from robust flow and bubbling effects
- Automatic drain on HMI command and audible alarm at end of test
- PLC + touchscreen HMI, automatic data logging with graphs and Excel export over USB
- UPS support for power cuts of up to 15 minutes; installation, training and calibration by an accredited laboratory included
Standards
- TS EN 1087-1 — Particleboards — determination of moisture resistance — Part 1: boil test
Specifications
- Water Tank Inner Dimensions800 × 600 × 200 mm
- Operating TemperatureBoiling point
100 °C - Time to BoilingWithin 90 + 10 minutes of examine start
- Boiling Time1–100 hours, adjustable on the HMI
- Temperature Resolution1 °C
- Time Resolution1 minute
- Water Level Resolution1 mm
- Grate SystemMin. 15 mm above the bottom; 48 mm spacing
- Grate Load CapacityUp to 5 kg of specimens without deformation
- Specimen Baskets4 pcs, 200 × 150 × 50 mm, removable stainless
- Water Level RegulationSensor-based, constant level throughout the examine
- Water ReplenishmentAutomatic from auxiliary tank
- DrainAutomatic on HMI command
- LidClosed layout to reduce water
steam loss - AlarmAudible alarm at end of test
- Power Cut ManagementUPS support up to 15 min; continues from recorded data after longer outages
- ControlPLC + HMI touchscreen
- WarrantyAt least 2 years; 10 years of service and spare parts after warranty
FAQ
- QHow long does the tank take to boil and how long can a examine run?
- AThe boiling point (100 °C) is reached within 90 + 10 minutes of the start of the examine. The boiling time is set on the HMI between 1 and 100 hours, with 1 minute and 1 °C setting resolution.
- QHow are the water level and the specimens protected during the examine?
- AA level sensor keeps the water at a constant level, topped up automatically from an auxiliary tank without disturbing the boiling temperature. There is no continuous water circulation, so specimens stay fully submerged and are protected from strong flow and bubbling effects.
- QWhat is the specimen capacity?
- AFour removable stainless baskets of 200 × 150 × 50 mm sit on a grate that holds specimens at least 15 mm above the bottom with 48 mm spacing and works without deformation up to 5 kg of specimens.
- QHow are power cuts, data and delivery handled?
- AA UPS keeps the test running through cuts of up to 15 minutes; after longer outages the system continues from the logged data. Temperature, time and water level are recorded, shown as graphs and exported to Excel over USB, and an audible alarm sounds at the end. Delivery covers installation, at least 2 days of training and calibration by an accredited lab, with a 2-year minimum warranty.
Specifications
| Parameter | Specification |
|---|---|
| Model | RTPLINE-Boiling Test Tank |
| Brand | RTPLINE |
| Code | 9024800000 |
Specifications are configurable to your pipe sizes and test standard. Ask us for the full datasheet and a configuration proposal.
Source: RTPLINE product engineering data · Updated November 2026



