Контакт: Mr. Li Zong testermachine@aliyun.com
CE Certified · ISO Compliant · Export Worldwide
WhatsApp +86 186 0104 2089 testermachine@aliyun.com QQ 871507446
Домой › Продукты › Испытания полимерных композитов › Торцевые заглушки для труб большого диаметра (индивидуальные исследования и разработки)
Испытания полимерных композитов Standard ISO 1167

Торцевые заглушки для труб большого диаметра (индивидуальные исследования и разработки)

Сверхпрочный, изготовленные по индивидуальному заказу торцевые заглушки для гидростатических испытаний под давлением полимерных труб большого диаметра — от 800 мм до 4000 мм. Отличается отсутствием пресса, Сборка без использования молотка с помощью специального резьбового прессового механизма и техн…

RTPLINE
9024800000
✔ Reply within 1 business day ✔ 12-month parts warranty ✔ Installation & training support
Quick Answer Updated November 2026

Торцевые заглушки для труб большого диаметра (индивидуальные исследования и разработки) is a piece of pipe testing equipment from RTPLINE.

ISO 1167ASTM D1598ASTM D1599
About This Machine

Product Overview

Сверхпрочный, изготовленные по индивидуальному заказу торцевые заглушки для гидростатических испытаний под давлением полимерных труб большого диаметра — от 800 мм до 4000 мм. Отличается отсутствием пресса, Сборка без использования молотка с помощью специального резьбового прессового механизма и технологии адаптивных силиконовых/резиновых уплотнений. Учитывает деформацию трубы во время испытаний и не требует использования специальных инструментов.

Основные особенности

  • Диапазон диаметров: 800–4000 мм
  • Совместим с PE, П.П., PE-RT, Трубы из PEX
  • Без пресса иamp; схема сборки без использования молотка
  • Индивидуально разработанный механизм пресса с резьбовым приводом
  • Метод изготовления адаптивных уплотнений из силикона и резины
  • Материал: оцинкованная конструкционная сталь или нержавеющая сталь AISI 304/316L
  • Выдерживает деформацию трубы во время гидростатических испытаний
  • Гарантия на 1 год

Стандарты

  • ISO 1167 — Термопластиковые трубы — сопротивление внутреннему давлению
  • ASTM D1598 — Время до разрушения при постоянном внутреннем давлении
  • ASTM D1599 — Давление кратковременного гидравлического разрушения

Часто задаваемые вопросы

  • QКакие диаметры входят в ассортимент?
  • Aот 800 мм до 4 000 мм, разработанные с учетом размеров труб каждого конкретного проекта.
  • QКак устанавливаются крышки?
  • AБлагодаря специальному резьбовому прессовому механизму — без использования гидравлического пресса, не требуется ни молоток, ни специальные инструменты.
  • QЧто произойдет, если труба деформируется во время обследования?
  • AАдаптивное уплотнение из силикона и резины повторяет форму деформации, Таким образом, уплотнитель продолжает обеспечивать герметичность, даже когда стенка трубы смещается под действием давления.
  • QКакие материалы доступны?
  • AОцинкованная конструкционная сталь или нержавеющая сталь AISI 304/316L, для физкультуры, П.П., Трубы из PE-RT и PEX.
Technical Data

Specifications

ParameterSpecification
BrandRTPLINE
Code9024800000

Specifications are configurable to your pipe sizes and test standard. Ask us for the full datasheet and a configuration proposal.

Source: RTPLINE product engineering data · Updated November 2026

Standards & Definitions

What the standards mean

ISO 1167

International method for determining the resistance of thermoplastics pipes, fittings and assemblies to constant internal water pressure at a controlled temperature.

ASTM D1598

Standard test method for time-to-failure of plastic pipe under constant internal pressure — the long-term hydrostatic strength test.

ASTM D1599

Standard test method for resistance to short-time hydraulic pressure of plastic pipe, tubing and fittings — the burst-pressure test.

Testing to a published standard keeps results comparable with other laboratories and with your customer's incoming inspection.

FAQ
How many test stations do I need?
Answer: It depends on how many samples you run per day. For occasional testing with a few samples, 3–6 stations are sufficient. For daily batch release or a busy test house, choose 5–30 stations so long-duration tests run in parallel instead of queueing. Send us your daily sample count and we will size the station number for you.
How do I get pricing and a recommended configuration?
Answer: Tell us the pipe diameter range, the test standard (for example ISO 1167 or ASTM D1598/D1599), the number of stations you need and the water-bath size you expect. We will return a configuration proposal with a firm quotation, lead time and shipping terms — normally within one business day.
What are your strengths?
Answer: RTPLINE designs, builds and tests plastic pipe testing and extrusion equipment in-house. Critical components are selected for continuous industrial duty, and every unit is pressure-tested and run before shipment, so performance is repeatable from the first day on your floor.
How will the machine be assembled and debugged when it arrives at the factory, and will the customer's employees be trained?
Answer: The equipment is assembled and debugged at our works before delivery, then packed for shipment. Our engineers provide remote video guidance for installation and commissioning, and on-site installation and operator training can be arranged. Training covers daily operation, changeover, routine maintenance and safety.
What do you do if there is a problem or failure with equipment that requires guidance or replacement parts?
Answer: Send us the symptom and a short video; our service team replies with a diagnosis and step-by-step guidance. If remote support cannot solve it, an engineer can be dispatched to site. Parts replaced during the warranty period are supplied free of charge; wear parts are charged at cost only.
How long is the warranty period of the product?
Answer: Every machine carries a 12-month parts warranty together with lifetime technical support. Consumables and wear parts are excluded, and are quoted at cost.
Can I visit your factory in China?
Answer: Yes. Factory visits are welcome — we can arrange airport pickup and a full demonstration of the machine running with your pipe samples. Video tours are also available if travel is not convenient.
Can you customize according to requirements?
Answer: Yes. Working range, number of stations, fixture sizes, voltage, control interface and guarding can be customized to your pipe sizes, test standard and plant layout. Send your specification and we will propose a configuration.

Похожие товары

Подробнее →