Kontakt: Mr. Li Zong testermachine@aliyun.com
CE Certified · ISO Compliant · Export Worldwide
WhatsApp +86 186 0104 2089 testermachine@aliyun.com QQ 871507446
Homepage › Produkte › Prüfung von Polymerverbindungen › Endkappen für Rohre mit großem Durchmesser (kundenspezifische Forschung und Entwicklung)
Prüfung von Polymerverbindungen Standard ISO 1167

Endkappen für Rohre mit großem Durchmesser (kundenspezifische Forschung und Entwicklung)

Für hohe Beanspruchung, Maßgefertigte Endkappen für die hydrostatische Druckprüfung von Polymerrohren mit großem Durchmesser von 800 mm bis 4000 mm. Verfügt über ein druckfreies, Hammerfreie Montage mit einem speziell entwickelten Gewindepressmechanismus und adaptiver Silikon-/Gummidichtungstechnolo…

RTPLINE
9024800000
✔ Reply within 1 business day ✔ 12-month parts warranty ✔ Installation & training support
Quick Answer Updated November 2026

Endkappen für Rohre mit großem Durchmesser (kundenspezifische Forschung und Entwicklung) is a piece of pipe testing equipment from RTPLINE.

ISO 1167ASTM D1598ASTM D1599
About This Machine

Product Overview

Für hohe Beanspruchung, Maßgefertigte Endkappen für die hydrostatische Druckprüfung von Polymerrohren mit großem Durchmesser von 800 mm bis 4000 mm. Verfügt über ein druckfreies, Hammerfreie Montage mit einem speziell entwickelten Gewindepressmechanismus und adaptiver Silikon-/Gummidichtungstechnologie. Gleicht Rohrverformungen während der Prüfung aus und erfordert keine Spezialwerkzeuge.

Wichtigste Merkmale

  • Durchmesserbereich: 800–4000 mm
  • Kompatibel mit PE, PP, PE-RT, PEX-Rohre
  • Ohne Druck & Montageplan ohne Hammer
  • Maßgefertigter Pressmechanismus mit Gewinde
  • Technik mit adaptiver Silikon-/Gummidichtung
  • Material: verzinkter Baustahl oder Edelstahl AISI 304/316L
  • Verträgt eine Verformung des Rohrs während der hydrostatischen Prüfung
  • 1 Jahr Garantie

Normen

  • ISO 1167 – Thermoplastische Rohre – Beständigkeit gegen Innendruck
  • ASTM D1598 – Zeit bis zum Versagen bei konstantem Innendruck
  • ASTM D1599 – Kurzzeitiger hydraulischer Versagensdruck

Häufig gestellte Fragen

  • QWelche Durchmesser werden abgedeckt?
  • A800 mm bis 4.000 mm, auf die Rohrdimensionen des jeweiligen Projekts abgestimmt.
  • QWie werden die Kappen angebracht?
  • AMit einem speziell angefertigten Gewindepressmechanismus – keine hydraulische Presse, Es werden weder Hammer noch Spezialwerkzeuge benötigt.
  • QWas passiert, wenn sich das Rohr während der Untersuchung verformt?
  • ADie anpassungsfähige Silikon-/Gummidichtung passt sich der Verformung an, So bleibt die Kappe dicht, auch wenn sich die Rohrwand unter Druck bewegt.
  • QWelche Materialien stehen zur Verfügung?
  • AVerzinkter Baustahl oder Edelstahl AISI 304/316L, für Sport, PP, PE-RT- und PEX-Rohre.
Technical Data

Specifications

ParameterSpecification
BrandRTPLINE
Code9024800000

Specifications are configurable to your pipe sizes and test standard. Ask us for the full datasheet and a configuration proposal.

Source: RTPLINE product engineering data · Updated November 2026

Standards & Definitions

What the standards mean

ISO 1167

International method for determining the resistance of thermoplastics pipes, fittings and assemblies to constant internal water pressure at a controlled temperature.

ASTM D1598

Standard test method for time-to-failure of plastic pipe under constant internal pressure — the long-term hydrostatic strength test.

ASTM D1599

Standard test method for resistance to short-time hydraulic pressure of plastic pipe, tubing and fittings — the burst-pressure test.

Testing to a published standard keeps results comparable with other laboratories and with your customer's incoming inspection.

FAQ
How many test stations do I need?
Answer: It depends on how many samples you run per day. For occasional testing with a few samples, 3–6 stations are sufficient. For daily batch release or a busy test house, choose 5–30 stations so long-duration tests run in parallel instead of queueing. Send us your daily sample count and we will size the station number for you.
How do I get pricing and a recommended configuration?
Answer: Tell us the pipe diameter range, the test standard (for example ISO 1167 or ASTM D1598/D1599), the number of stations you need and the water-bath size you expect. We will return a configuration proposal with a firm quotation, lead time and shipping terms — normally within one business day.
What are your strengths?
Answer: RTPLINE designs, builds and tests plastic pipe testing and extrusion equipment in-house. Critical components are selected for continuous industrial duty, and every unit is pressure-tested and run before shipment, so performance is repeatable from the first day on your floor.
How will the machine be assembled and debugged when it arrives at the factory, and will the customer's employees be trained?
Answer: The equipment is assembled and debugged at our works before delivery, then packed for shipment. Our engineers provide remote video guidance for installation and commissioning, and on-site installation and operator training can be arranged. Training covers daily operation, changeover, routine maintenance and safety.
What do you do if there is a problem or failure with equipment that requires guidance or replacement parts?
Answer: Send us the symptom and a short video; our service team replies with a diagnosis and step-by-step guidance. If remote support cannot solve it, an engineer can be dispatched to site. Parts replaced during the warranty period are supplied free of charge; wear parts are charged at cost only.
How long is the warranty period of the product?
Answer: Every machine carries a 12-month parts warranty together with lifetime technical support. Consumables and wear parts are excluded, and are quoted at cost.
Can I visit your factory in China?
Answer: Yes. Factory visits are welcome — we can arrange airport pickup and a full demonstration of the machine running with your pipe samples. Video tours are also available if travel is not convenient.
Can you customize according to requirements?
Answer: Yes. Working range, number of stations, fixture sizes, voltage, control interface and guarding can be customized to your pipe sizes, test standard and plant layout. Send your specification and we will propose a configuration.

Ähnliche Produkte

Details ansehen →