Kontak: Mr. Li Zong testermachine@aliyun.com
CE Certified · ISO Compliant · Export Worldwide
WhatsApp +86 186 0104 2089 testermachine@aliyun.com QQ 871507446
Beranda › Produk-Produk › Lini Produksi Pipa RTP › Continuous Glass Fiber Tape Winding Reinforced Thermoplastic Composite Pipe (RTP/TCP) Production Line
Lini Produksi Pipa RTP

Continuous Glass Fiber Tape Winding Reinforced Thermoplastic Composite Pipe (RTP/TCP) Production Line

| Product Descriptio Glass fiber tape winding reinforced composite tube production equipment This production line is designed for continuous manufacturing of Glass Fiber Tape Winding Reinforced Thermoplastic Composite Tube (RTP/TCP). The system applies pre-impregnated unidirectional (UD) tape windin…

50 – 600mm
30MPa (300bar)
Servo motor + load cell, closed-loop automatic adjustment
Vacuum sizing tank + spray cooling. spraying tank Vacuum tank
✔ Reply within 1 business day ✔ 12-month parts warranty ✔ Installation & training support
Quick Answer Updated November 2026

Continuous Glass Fiber Tape Winding Reinforced Thermoplastic Composite Pipe (RTP/TCP) Production Line is a pipe production line from RTPLINE, a 30MPa (300bar) pressure control range.

About This Machine

Product Overview

|

Product Descriptio

Glass fiber tape winding reinforced composite tube production equipment

This production line is designed for continuous manufacturing of Glass Fiber Tape Winding Reinforced Thermoplastic Composite Tube (RTP/TCP). The system applies pre-impregnated unidirectional (UD) tape winding / in-situ consolidation process, using hot air heating to achieve simultaneous winding and fusion without post-curing. The produced pipe features a three-layer structure: inner liner (PE/PP/PERT/PA), reinforcement core (interlaced glass fiber UD tape winding), and outer protective layer (abrasion-resistant/UV-steady/flame-retardant). Pipe diameter ranges from 50 to 600mm, with maximum pressure rating up to 30MPa, offering a reliable alternative to traditional metal and GRE tubes.

Working Principle & Process Flow

  • Inner liner extruding: Single/twin screw extruder extrudes thermoplastic (PE/PP, etc.) to form a continuous inner pipe through a die.
  • Glass fiber tape winding reinforcement: The inner tube enters a 4-spindle (or multi-spindle) winding unit. Glass fiber UD tape is wound at set winding angles (±45°~±60° adjustable) under constant tension, with multiple interlaced layers. Simultaneously, hot air nozzles heat the winding point for in-situ consolidation, fusing the tape with the inner pipe to form the reinforcement core.
  • Outer coating: The reinforced tube enters a second extruder to apply an outer protective layer (color stripes, flame retardant, etc. optional).
  • Cooling & sizing: Vacuum sizing tank + spray cooling.

spraying tank

Vacuum tank

  • Haul-off, cutting, coiling: Caterpillar haul-off unit, chip-less automatic cutter, dual-station coiler

cutting unit

puller

station coiler

Main Technical Parameters

Parameter

Range / Option

Pipe outer diameter

50 – 600mm

Reinforcement thickness

1.2 – 6mm

Max working pressure

30MPa (300bar)

Number of winding spindles

4 / 6 / 8 optional

Winding angle range

±30°~±75° adjustable

Heating method

Hot air in-situ consolidation (closed-loop temperature regulation)

Tension regulation

Servo motor + load cell, closed-loop automatic adjustment

Tape width

10 – 40mm

Line speed

0.5 – 4 m/min (depends on diameter and layers)

Compatible tapes

Glass fiber UD tape, aramid tape, steel cord tape, steel tape, etc.

Core Advantages

  • Versatile: Quick changeover between different reinforcement tapes (glass fiber/aramid/steel) for various pipe grades.
  • Continuous & productive: Winding and consolidation occur simultaneously – no offline curing, greatly improving productivity.
  • Precise control: Automatic winding angle tracking, closed-loop tension regulation, PID temperature regulation ensure uniform defect-free reinforcement layer.
  • Eco-friendly & recyclable: Fully thermoplastic material; tubes can be recycled at end of life, meeting circular economy requirements.
  • Advantages over alternatives: Lighter, corrosion-resistant, flexible & spoolable compared to metal tubes; non-brittle and recyclable compared to GRE tubes.

Typical Applications

  • Oil & gas transportation (high-pressure gathering lines)
  • High-pressure water injection, fracturing flowback fluid transfer
  • Municipal water supply & drainage, fire water lines
  • Thermal pipe networks (operating temperature up to 95°C)
  • Chemical corrosive media transfer
  • Mine backfill pipelines

Optional Configurations

  • Multi-spindle winding unit (6-spindle / 8-spindle)
  • Online wall thickness gauge
  • Laser diameter gauge
  • Color stripe co-extruding die
  • Pipe end belling / flaring instrument
  • Fully automated coil changeover system

Company introduction

Our primary products include

  • Tape winding reinforced composite pipe manufacturing apparatus – applicable for tapes such as fiberglass tape, aramid tape, polyester tape, steel tape, steel cord tape, etc.
  • Non-metallic wire winding reinforced composite pipe production equipment – applicable for polyester wire, aramid wire, fiberglass wire, basalt wire, as well as twisted, bundled, or rope forms.
  • Metal wire winding reinforced composite pipe manufacturing instrument – including steel wire mesh skeleton, etc.
  • High-efficiency plastic extrusion manufacturing equipment
  • Composite pipe manufacturing machinery
  • Auxiliary equipment

Our tape winding reinforced pipe winding instrument (RTP pipe instrument) is one of our flagship products and is also a patented product of the company (Patent No.: ZL201721360511.X).

|

Comment & FAQ

1: What are your strengths?

2: How will the apparatus be assembled and debugged when it arrives at the factory, and will the customer's employees be trained?

  • AnswerWe will debug the machinery before delivering it to the customer's site. After the debugging is correct, it will be disassembled and sent to the customer's factory. After shipment, we will have experienced engineers on-site to install and assist in debugging. After the on-site installation and commissioning are completed, all-round training will be provided to the customer's employees.

3: What do you do if there is a problem or failure with equipment that requires guidance or replacement parts?

  • AnswerIf there is a problem, we will offer video technical guidance, and if necessary, we will send engineers to the site to solve the problem. If during the warranty period, parts need to be replaced, we will send spare parts for free. For wearing parts, we only charge the cost fee.

4: How long is the warranty period of the product?

  • AnswerWe will offer 1 year parts warranty and technical support.

5: Can I visit your factory in China?

visits, we can offer airport pick-up for you.

6 : Can you customize according to requirements?

Technical Data

Specifications

ParameterSpecification
Cooling & sizingVacuum sizing tank + spray cooling. spraying tank Vacuum tank
VersatileQuick changeover between different reinforcement tapes (glass fiber/aramid/steel) for various pipe grades.
Continuous & efficientWinding and consolidation occur simultaneously – no offline curing, greatly improving productivity.
Pipe outer diameter50 – 600mm
Reinforcement thickness1.2 – 6mm
Max working pressure30MPa (300bar)
Number of winding spindles4 / 6 / 8 optional
Winding angle range±30°~±75° adjustable
Heating methodHot air in-situ consolidation (closed-loop temperature control)
Tension controlServo motor + load cell, closed-loop automatic adjustment
Tape width10 – 40mm
Line speed0.5 – 4 m/min (depends on diameter and layers)
Compatible tapesGlass fiber UD tape, aramid tape, steel cord tape, steel tape, etc.

Specifications are configurable to your pipe sizes and test standard. Ask us for the full datasheet and a configuration proposal.

Source: RTPLINE product engineering data · Updated November 2026

FAQ
How many test stations do I need?
Answer: It depends on how many samples you run per day. For occasional testing with a few samples, 3–6 stations are sufficient. For daily batch release or a busy test house, choose 5–30 stations so long-duration tests run in parallel instead of queueing. Send us your daily sample count and we will size the station number for you.
How do I get pricing and a recommended configuration?
Answer: Tell us the pipe diameter range, the test standard (for example ISO 1167 or ASTM D1598/D1599), the number of stations you need and the water-bath size you expect. We will return a configuration proposal with a firm quotation, lead time and shipping terms — normally within one business day.
What are your strengths?
Answer: RTPLINE designs, builds and tests plastic pipe testing and extrusion equipment in-house. Critical components are selected for continuous industrial duty, and every unit is pressure-tested and run before shipment, so performance is repeatable from the first day on your floor.
How will the machine be assembled and debugged when it arrives at the factory, and will the customer's employees be trained?
Answer: The equipment is assembled and debugged at our works before delivery, then packed for shipment. Our engineers provide remote video guidance for installation and commissioning, and on-site installation and operator training can be arranged. Training covers daily operation, changeover, routine maintenance and safety.
What do you do if there is a problem or failure with equipment that requires guidance or replacement parts?
Answer: Send us the symptom and a short video; our service team replies with a diagnosis and step-by-step guidance. If remote support cannot solve it, an engineer can be dispatched to site. Parts replaced during the warranty period are supplied free of charge; wear parts are charged at cost only.
How long is the warranty period of the product?
Answer: Every machine carries a 12-month parts warranty together with lifetime technical support. Consumables and wear parts are excluded, and are quoted at cost.
Can I visit your factory in China?
Answer: Yes. Factory visits are welcome — we can arrange airport pickup and a full demonstration of the machine running with your pipe samples. Video tours are also available if travel is not convenient.
Can you customize according to requirements?
Answer: Yes. Working range, number of stations, fixture sizes, voltage, control interface and guarding can be customized to your pipe sizes, test standard and plant layout. Send your specification and we will propose a configuration.

Produk Terkait

Lihat Detail →