Contacto: Mr. Li Zong testermachine@aliyun.com
CE Certified · ISO Compliant · Export Worldwide
WhatsApp +86 186 0104 2089 testermachine@aliyun.com QQ 871507446
Inicio › Productos › Ensayos de compuestos poliméricos › Dispositivo de determinación del tiempo de inducción de la oxidación (DSC/TIO)
Ensayos de compuestos poliméricos Standard ISO EN 11357-1/3/6

Dispositivo de determinación del tiempo de inducción de la oxidación (DSC/TIO)

Sistema avanzado de evaluación térmica que mide los cambios en los materiales bajo programas de temperatura controlados para DSC, OIT, y el análisis por TGA. Cumple con las normas ISO EN 11357 para polímeros, productos farmacéuticos, metales, y aleaciones. Características principales Rango de temper…

RTPLINE
9024800000
✔ Reply within 1 business day ✔ 12-month parts warranty ✔ Installation & training support
Quick Answer Updated November 2026

Dispositivo de determinación del tiempo de inducción de la oxidación (DSC/TIO) is a piece of pipe testing equipment from RTPLINE.

About This Machine

Product Overview

Sistema avanzado de evaluación térmica que mide los cambios en los materiales bajo programas de temperatura controlados para DSC, OIT, y el análisis por TGA. Cumple con las normas ISO EN 11357 para polímeros, productos farmacéuticos, metales, y aleaciones.

Características principales

  • Rango de temperaturas: de -170 °C a +900 °C
  • Precisión de la temperatura: ±0,2 °C / resolución: ±0,02 °C
  • Velocidad de calentamiento: 0,01–500 °C/min
  • Muestra máxima: 50 mg (DSC), 10–1.000 mg (OIT)
  • Precisión del calorímetro: <±0,3 %, sensibilidad: 0,35 mW
  • 5,4 pulgadas panel de usuario con pantalla táctil
  • Dimensiones: 600 × 600 × 170 mm, 21,5 kg
  • Requiere gases de N₂ y O₂ de pureza ultraalta

Normas

  • ISO EN 11357-1/3/6 — Plásticos — Calorimetría diferencial de barrido (DSC)
  • ISO EN 11358-1 — Plásticos — Termogravimetría (TGA) de polímeros
  • ASTM E1131 — Determinación de la composición mediante termogravimetría

Especificaciones

  • Temperatura de funcionamiento25–350 °C
  • Resolución de temperatura0,1 °C
  • Precisión de la temperatura0,1 °C
  • Regulación de la temperaturaPID digital
  • Máx. Cantidad de la muestra17 mg
  • Velocidad de calentamiento5–20 °C/min
  • Precisión del calorímetro< ± 0.3%
  • Sensibilidad del calorímetro0,35 mW
  • PantallaSiete pulgadas pantalla táctil
  • Peso neto21,5 kg
  • Gases necesariosN₂, O₂ (pureza ultraelevada)
  • Potencia220 V

Preguntas frecuentes

  • Q¿Qué es el OIT y qué especificaciones lo definen?
  • AEl tiempo de inducción de la oxidación es el tiempo que transcurre desde que se cambia el gas de purga de nitrógeno a oxígeno hasta que la muestra comienza a oxidarse, se lee a partir del inicio de la fase exotérmica en la curva del DSC. Se define en la norma ISO 11357-6, ASTM D3895 y, para tuberías y accesorios de poliolefina, EN 728.
  • Q¿A qué temperatura se realiza la prueba de OIT en las tuberías de PE?
  • ALas tuberías y los compuestos de polietileno suelen someterse a ensayos isotérmicos a 200 °C, tal y como se indica en las especificaciones de las tuberías. La norma ISO 11357-6 describe asimismo un método dinámico que indica la temperatura a la que comienza la oxidación (temperatura OIT).
  • Q¿Qué gases necesita el dispositivo?
  • ANitrógeno (N₂) y oxígeno (O₂) de pureza extremadamente elevada. El nitrógeno protege la muestra mientras se calienta para medir la temperatura; El cambio al oxígeno inicia el recuento de la OIT.
  • Q¿Puede un mismo dispositivo medir la temperatura de fusión y la cristalinidad?
  • ASí. Ejecuta programas de calentamiento-enfriamiento-calentamiento según las normas ISO 11357-1 y -3, lo que da lugar a picos de fusión y cristalización, entalpía y grado de cristalinidad: útiles para confirmar la calidad de la materia prima y detectar polímeros mezclados en el regranulado.
Technical Data

Specifications

ParameterSpecification
BrandRTPLINE
Code9024800000

Specifications are configurable to your pipe sizes and test standard. Ask us for the full datasheet and a configuration proposal.

Source: RTPLINE product engineering data · Updated November 2026

FAQ
How many test stations do I need?
Answer: It depends on how many samples you run per day. For occasional testing with a few samples, 3–6 stations are sufficient. For daily batch release or a busy test house, choose 5–30 stations so long-duration tests run in parallel instead of queueing. Send us your daily sample count and we will size the station number for you.
How do I get pricing and a recommended configuration?
Answer: Tell us the pipe diameter range, the test standard (for example ISO 1167 or ASTM D1598/D1599), the number of stations you need and the water-bath size you expect. We will return a configuration proposal with a firm quotation, lead time and shipping terms — normally within one business day.
What are your strengths?
Answer: RTPLINE designs, builds and tests plastic pipe testing and extrusion equipment in-house. Critical components are selected for continuous industrial duty, and every unit is pressure-tested and run before shipment, so performance is repeatable from the first day on your floor.
How will the machine be assembled and debugged when it arrives at the factory, and will the customer's employees be trained?
Answer: The equipment is assembled and debugged at our works before delivery, then packed for shipment. Our engineers provide remote video guidance for installation and commissioning, and on-site installation and operator training can be arranged. Training covers daily operation, changeover, routine maintenance and safety.
What do you do if there is a problem or failure with equipment that requires guidance or replacement parts?
Answer: Send us the symptom and a short video; our service team replies with a diagnosis and step-by-step guidance. If remote support cannot solve it, an engineer can be dispatched to site. Parts replaced during the warranty period are supplied free of charge; wear parts are charged at cost only.
How long is the warranty period of the product?
Answer: Every machine carries a 12-month parts warranty together with lifetime technical support. Consumables and wear parts are excluded, and are quoted at cost.
Can I visit your factory in China?
Answer: Yes. Factory visits are welcome — we can arrange airport pickup and a full demonstration of the machine running with your pipe samples. Video tours are also available if travel is not convenient.
Can you customize according to requirements?
Answer: Yes. Working range, number of stations, fixture sizes, voltage, control interface and guarding can be customized to your pipe sizes, test standard and plant layout. Send your specification and we will propose a configuration.

Productos Relacionados

Ver Detalles →