Contacto: Mr. Li Zong testermachine@aliyun.com
CE Certified · ISO Compliant · Export Worldwide
WhatsApp +86 186 0104 2089 testermachine@aliyun.com QQ 871507446
Inicio › Productos › Ensayos de compuestos poliméricos › Medidor del índice de fluidez — MFR estándar (AL MFI A)
Ensayos de compuestos poliméricos Standard ISO 1133

Medidor del índice de fluidez — MFR estándar (AL MFI A)

Determina el índice de fluidez (MFR) y el volumen de fluidez (MVR) de sustancias termoplásticas a una temperatura y una carga definidas. Imprescindible para el control de calidad de los polímeros, inspección de las mercancías entrantes, y la supervisión de las líneas de producción. Esta configuració…

RTPLINE-MFI A
RTPLINE
9024800000
✔ Reply within 1 business day ✔ 12-month parts warranty ✔ Installation & training support
Quick Answer Updated November 2026

Medidor del índice de fluidez — MFR estándar (AL MFI A) is a piece of pipe testing equipment from RTPLINE.

About This Machine

Product Overview

Determina el índice de fluidez (MFR) y el volumen de fluidez (MVR) de sustancias termoplásticas a una temperatura y una carga definidas. Imprescindible para el control de calidad de los polímeros, inspección de las mercancías entrantes, y la supervisión de las líneas de producción. Esta configuración AL MFI A — Método de análisis: MFR; Sensor de desplazamiento: No; Carga automática del peso: No; Peso neto: 40 kg.

Características principales

  • Método de ensayo: MFR
  • Modos de medición MFR y MVR
  • Accionamiento automático por pistón
  • Pantalla táctil con salida digital
  • Aplicable a Educación Física, PP, ABS, PC, PET y más
  • Existencias disponibles

Normas

  • ISO 1133 — Plásticos — Índice de fluidez en masa (MFR) e índice de fluidez volumétrica (MVR)
  • ASTM D1238 — Índices de fluidez de termoplásticos mediante plastómetro de extrusión

Especificaciones

  • Método de ensayoMFR
  • Temperatura de funcionamiento (Especificaciones)120–300 °C
  • Temperatura de funcionamiento (Acero inoxidable)120–400 °C
  • Precisión de la temperatura0,1 °C
  • Regulación de la temperaturaPID adaptativo
  • Tamaño de la muestra3–8 g
  • Mecanismo de corteMotor paso a paso, Precisión de 0,01 s
  • Sensor de desplazamientoNo
  • Carga automática del pesoNo
  • Peso neto40 kg
  • Potencia220 V – 450 W

Preguntas frecuentes

  • Q¿Cuál es la diferencia entre MFI y ¿MFR y MVR?
  • ALos índices MFI y MFR describen el mismo resultado: la masa de polímero extruido en 10 minutos (g/10 min). El MVR es el caudal volumétrico (cm³/10 min) y requiere un sensor de desplazamiento de pistón. El AL MFI A mide el MFR; Los indicadores AL MFI B y AL MFI O miden tanto el MFR como el MVR.
  • Q¿Qué condiciones de ensayo se utilizan para el PE y el PP?
  • ALas condiciones vienen establecidas por la norma ISO 1133
    ASTM D1238 según la familia de polímeros; por ejemplo, 190 °C con 2,16 kg para el polietileno y 230 °C con 2,16 kg para el polipropileno. En la ficha técnica de la sustancia o en las especificaciones del cliente se indica qué condición debe aplicarse.
  • Q¿De qué tamaño es la muestra y cuánto tiempo dura un examen?
  • APara un análisis se utilizan entre 3 y 8 g de gránulos o material triturado. Una vez que el cilindro ha precalentado la muestra, los valores de corte se registran a intervalos fijos; una prueba completa suele durar unos minutos, por eso el MFR es el primer control que se realiza sobre el material entrante.
  • Q¿Por qué es importante el MFR en los plásticos reciclados?
  • AEl reciclaje acorta o reticula las cadenas poliméricas, lo que modifica el caudal. Al comparar el MFR de un lote de regranulado con el del grado de referencia, se puede determinar de inmediato si se podrá procesar en la línea de extrusión o de inyección sin necesidad de ajustes.
Technical Data

Specifications

ParameterSpecification
ModelRTPLINE-MFI A
BrandRTPLINE
Code9024800000

Specifications are configurable to your pipe sizes and test standard. Ask us for the full datasheet and a configuration proposal.

Source: RTPLINE product engineering data · Updated November 2026

FAQ
How many test stations do I need?
Answer: It depends on how many samples you run per day. For occasional testing with a few samples, 3–6 stations are sufficient. For daily batch release or a busy test house, choose 5–30 stations so long-duration tests run in parallel instead of queueing. Send us your daily sample count and we will size the station number for you.
How do I get pricing and a recommended configuration?
Answer: Tell us the pipe diameter range, the test standard (for example ISO 1167 or ASTM D1598/D1599), the number of stations you need and the water-bath size you expect. We will return a configuration proposal with a firm quotation, lead time and shipping terms — normally within one business day.
What are your strengths?
Answer: RTPLINE designs, builds and tests plastic pipe testing and extrusion equipment in-house. Critical components are selected for continuous industrial duty, and every unit is pressure-tested and run before shipment, so performance is repeatable from the first day on your floor.
How will the machine be assembled and debugged when it arrives at the factory, and will the customer's employees be trained?
Answer: The equipment is assembled and debugged at our works before delivery, then packed for shipment. Our engineers provide remote video guidance for installation and commissioning, and on-site installation and operator training can be arranged. Training covers daily operation, changeover, routine maintenance and safety.
What do you do if there is a problem or failure with equipment that requires guidance or replacement parts?
Answer: Send us the symptom and a short video; our service team replies with a diagnosis and step-by-step guidance. If remote support cannot solve it, an engineer can be dispatched to site. Parts replaced during the warranty period are supplied free of charge; wear parts are charged at cost only.
How long is the warranty period of the product?
Answer: Every machine carries a 12-month parts warranty together with lifetime technical support. Consumables and wear parts are excluded, and are quoted at cost.
Can I visit your factory in China?
Answer: Yes. Factory visits are welcome — we can arrange airport pickup and a full demonstration of the machine running with your pipe samples. Video tours are also available if travel is not convenient.
Can you customize according to requirements?
Answer: Yes. Working range, number of stations, fixture sizes, voltage, control interface and guarding can be customized to your pipe sizes, test standard and plant layout. Send your specification and we will propose a configuration.

Productos Relacionados

Ver Detalles →