Kontakt: Mr. Li Zong testermachine@aliyun.com
CE Certified · ISO Compliant · Export Worldwide
WhatsApp +86 186 0104 2089 testermachine@aliyun.com QQ 871507446
Homepage › Produkte › RTP-Rohrprüfung › Dynamisches Differenzkalorimeter bei hohem Druck mit CE-Zertifikat
RTP-Rohrprüfung Standard ISO11357-6

Dynamisches Differenzkalorimeter bei hohem Druck mit CE-Zertifikat

Differential-Scanning-Kalorimeter bei hohem Druck Normen · ISO 11357-6, Isotherme OIT und dynamische OIT (OOT)   · ISO 11357-3, Schmelz- und Kristallisationsenthalpie · ISO 11357-2, Glasübergangstemperatur · ASTM D5483-02 Highlights Prüfung bei einem Hochdruck von 3/5 MPa Touchscreen + Computersteue…

9024800000
✔ Reply within 1 business day ✔ 12-month parts warranty ✔ Installation & training support
Quick Answer Updated November 2026

Dynamisches Differenzkalorimeter bei hohem Druck mit CE-Zertifikat is a piece of pipe testing equipment from RTPLINE.

About This Machine

Product Overview

Differential-Scanning-Kalorimeter bei hohem Druck

Normen

· ISO 11357-6, Isotherme OIT und dynamische OIT (OOT)  

· ISO 11357-3, Schmelz- und Kristallisationsenthalpie

· ISO 11357-2, Glasübergangstemperatur

· ASTM D5483-02

Highlights

  • Prüfung bei einem Hochdruck von 3/5 MPa

  • Touchscreen + Computersteuerung

  • Software – Vollautomatische Ausführung

  •  Funktionen

1. Glasübergangstemperatur

2.       Phasenübergang

3.       Temperatur und Enthalpie des Schmelzens und der Kristallisation    

4.       Oxidationsinduktionszeit (OIT)

5.       Oxidationsinduktionstemperatur (OOT)

6.       Schmelzpunkt

Anwendung

DSC ist ein intelligentes und miniaturisiertes Gerät zur thermischen Analyse, die für den Oxidationsinduktionszeit-Test (OIT) gilt, Oxidationsinduktionstemperatur (dynamische OIT, auch OOT genannt), sowie die Glasübergangstemperatur, Phasenübergang, Temperatur und Enthalpie des Schmelzens und der Kristallisation.

Es bietet eine Analysemethode für organische, anorganisch, Polymer, Mineral, petrochemische Produkte, Textil, Medizin, usw. Funktionen wie das Vergrößern und Verkleinern des Diagramms sorgen dafür, dass sich die benutzerfreundliche Oberfläche leicht bedienen lässt.

Funktionen

  1. Computer wird mit zahlreichen Informationen vorgestellt, z. B. Temperatureinstellung, Proben-Temperatur, Sauerstoffdurchfluss, Stickstoffdurchfluss, DSC-Signal usw.

  2. Integrierter Ofen, Vom Benutzer wählbare Rate für den Temperaturanstieg bzw. -abfall.

  3. Doppelte Temperatursensoren gewährleisten eine hohe Wiederholbarkeit der Testergebnisse. Ein an der Ofenwand angebrachter Sensor, das andere am unteren Ende der Probe zur Erfassung der tatsächlichen Testtemperatur. Mithilfe einer patentierten Regelungstechnik wird die Temperatur der Probe auf den Sollwert gebracht, indem die Temperatur an der Ofenwand geregelt wird.

  4. Der digitale Massendurchflussmesser schaltet den Durchfluss von Sauerstoff und Stickstoff automatisch mit hoher Schaltgeschwindigkeit um.

  5. Mitgelieferte Standardprobe zur Kalibrierung des konstanten Temperaturkoeffizienten.

  6. Auf eine einzige Taste vereinfacht. Je nach Bedarf lassen sich Dutzende von Befehlen kombinieren, was die Arbeit erleichtert. Unterstützt außerdem eine Selbstprogrammierungsfunktion.

  7. Bei Standardmaterial (Indium, Zinn, Zink), Die Benutzer können den Temperaturkoeffizienten und den Enthalpiekoeffizienten selbst einstellen.

  8. Die Übernahme, Speicherung und Darstellung der Datenkurve, Ergebnisbericht einschließlich Temperaturkalibrierung und -korrektur, Erweiterung der Anfangstemperatur, Enthalpiegrößen, Glasübergangstemperatur, Enthalpieänderungsverhältnis (Reaktionsgrad), Oxidationsinduktionszeit (OIT), sowie die Verarbeitung dynamischer Parameter, usw.

Technische Daten

1.        Temperaturbereich: Raumtemperatur bis 500 ℃ (800 ℃ erhältlich)

2.        Temperaturauflösung: 0,01 °C

3.        Heizgeschwindigkeit: 0,1 bis 80 ℃/min

4.        Abkühlgeschwindigkeit: 0,1 bis 20 °C/min  

5.        Gasdruck: ≤ 3 MPa (RTPLINE-DSC-HP3) oder ≤ 5 MPa (RTPLINE-DSC-HP5)

6.        Druckgenauigkeit: 0,2 MPa

7.        Temperaturregelungsmodus: Heizen, Kühlung, konstante Temperatur, jede Kombination aus drei Arten der Fahrradnutzung, Temperatur ohne Unterbrechung

8.        DSC-Bereich: 0 bis ±500 mW

9.        DSC-Auflösung: 0,01 mW

10.     DSC-Empfindlichkeit: 0,1 mW

11.     Gas zur Atmosphärensteuerung: Zweikanalige Gassteuerung durch automatische Regelung

12.     Gasdurchfluss: 0–250 ml/min

13.     Kalibrierstandard: mit Standardmaterial (Indium, Zinn, Zink), Die Benutzer können den Temperaturkoeffizienten und den Enthalpiekoeffizienten selbst anpassen.

14.     Anzeigemodus: Touchscreen und PC

15.     Konstruktion mit vollständig geschlossener Tragkonstruktion, verhindern, dass Gegenstände in den Ofenraum fallen, Verschmutzung des Ofenkörpers, die Wartungshäufigkeit senken

16.     Betriebsleistung: 220 V Wechselstrom, 50 Hz, 300 W

4533


Technical Data

Specifications

ParameterSpecification
Code9024800000

Specifications are configurable to your pipe sizes and test standard. Ask us for the full datasheet and a configuration proposal.

Source: RTPLINE product engineering data · Updated November 2026

FAQ
How many test stations do I need?
Answer: It depends on how many samples you run per day. For occasional testing with a few samples, 3–6 stations are sufficient. For daily batch release or a busy test house, choose 5–30 stations so long-duration tests run in parallel instead of queueing. Send us your daily sample count and we will size the station number for you.
How do I get pricing and a recommended configuration?
Answer: Tell us the pipe diameter range, the test standard (for example ISO 1167 or ASTM D1598/D1599), the number of stations you need and the water-bath size you expect. We will return a configuration proposal with a firm quotation, lead time and shipping terms — normally within one business day.
What are your strengths?
Answer: RTPLINE designs, builds and tests plastic pipe testing and extrusion equipment in-house. Critical components are selected for continuous industrial duty, and every unit is pressure-tested and run before shipment, so performance is repeatable from the first day on your floor.
How will the machine be assembled and debugged when it arrives at the factory, and will the customer's employees be trained?
Answer: The equipment is assembled and debugged at our works before delivery, then packed for shipment. Our engineers provide remote video guidance for installation and commissioning, and on-site installation and operator training can be arranged. Training covers daily operation, changeover, routine maintenance and safety.
What do you do if there is a problem or failure with equipment that requires guidance or replacement parts?
Answer: Send us the symptom and a short video; our service team replies with a diagnosis and step-by-step guidance. If remote support cannot solve it, an engineer can be dispatched to site. Parts replaced during the warranty period are supplied free of charge; wear parts are charged at cost only.
How long is the warranty period of the product?
Answer: Every machine carries a 12-month parts warranty together with lifetime technical support. Consumables and wear parts are excluded, and are quoted at cost.
Can I visit your factory in China?
Answer: Yes. Factory visits are welcome — we can arrange airport pickup and a full demonstration of the machine running with your pipe samples. Video tours are also available if travel is not convenient.
Can you customize according to requirements?
Answer: Yes. Working range, number of stations, fixture sizes, voltage, control interface and guarding can be customized to your pipe sizes, test standard and plant layout. Send your specification and we will propose a configuration.

Ähnliche Produkte

Details ansehen →